LYF Jio F10Q Flash File & Tool – Flash Jio F10Q Without Box
Are you using LYF Jio F220B keypad mobile and now getting errors like auto reboot, no graphics, unable to turn ON or LYF Jio F220B is locked? If yes then you have landed on right place and today we will show you to easiest method to flash LYF Jio F220B Jio firmware. Best part of this method is that no need to use any premium or professional flash tool. Free Qpst tool is enough to flash LYF Jio F220B flash files as a LYF Jio F220B flash tool.
Why Flashing Is Important For Mobile:
Basically, you know about the operating system. Any operating system contains a version like “Android”. The android is also an operating system but if you face the issue of android device you can reset the device but so many times the device is not repaired by restore only so another one way it’s flashing. Yes, flashing is a way to repair your device. flash file is a file of the operating system they write on system memory by using the flash tool and all that process is called flashing.
Download LYF Jio F220B Flash File, Tool & Drivers
LYF Jio F220B Flash File Download Free – DOWNLOAD
LYF Jio F220B USB Drivers – DOWNLOAD
LYF Jio F220B Flash tool [QPST Tool] – DOWNLOAD
Requirements To Install LYF Jio F220B Flash FIle [Stock Firmware]
Charge the device approx. 80% to prevent accidental power off in between flashing process.
Download LYF Jio F220B flash file and save it on pc.
Download LYF Jio F220B flash tool and save it on pc.
Install or update “LYF Jio F220B USB Drivers” if required. Otherwise, skip this step.
Pc/Laptop and working USB cable is must.
What Is Boot Key And Which Is A Boot Key Of LYF Jio F220B ?
In simple words, boot key is a key which accesses a device driver to install firmware on the mobile phone.
The boot key of LYF Jio F220B is * And # button.
the step of pressing boot key
turn off your mobile and remove the battery and reinsert.
press and hold the select button and insert the USB cable thought mobile to pc.
The flashing process begins then release the select button.
How to Flash LYF Jio F10Q:
1- Download LYF F220b Flash file which consist of File, tool & Driver.
2- Install Driver
3- Connect Phone in ON mode to cross check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9008”
4- It means driver has been installed successfully.
5- Install Flash Tool, which will install shortcut on Desktop named QFLASH Tool.
6- Connect phone (Press * & # as Boot key)& Click on Load Content and from Flash File Folder select Content.xml
7- It will show Port in tool.
8- Click on Download Content to start Upgrading.
9- Wait till done appears.
10- After upgradation, device will shift to download mode.
11- Disconnect Phone & reinsert battery.
+
بلغ الادارة عن محتوى مخالف من هنا
ابلغون على الروابط التي لا تعمل من هنا